In this video i'll show you easy way to make a skewed chisel.
I need a pair of them to work with cheeks (planemaking) so lets go with it!


If you have any questions or sugestions just write a comment.


Big thanks for my patrons!
Andrew Dawson
Joshua Lucas
Ross Tomažin
Javier Quintana
Rene Polak
Luboš Šulc
Ramingr

For support my channel click here:
   / @stavrosgakos  

or use my PayPal account: esortodox@gmail(dot)com

Thank you!


....................................................................................................
For more check my instagram profile:
  / stavros_gakos  



Remember to subscribe my buddy, Łukasz Giergasz


Click here:
   • FrankenHebel  strug z przeszczepami  


Pair of an old chisels: (0:00)
Marking angle of the chisels: (0:24)
Grinding off the waste: (0:49)
Grinding the bevels: (1:45)
Flattening the edges: (2:20)
Sandblasting: (2:33)
Grinding the tang to one size: (3:00)
Flattening the back of the chisels: (3:28)
Sandblasting after flattening: (3:55)
Oxydation: (4:16)
Template of the handles: (4:40)
Boxwood for the handles: (4:47)
Turning the boxwood: (5:02)
Fitting and gluening the brass ferrule: (6:17)
Sanding the handle: (6:47)
Coat of boiled linseed oil: (7:16)
Drilling the hole for the tang : (7:27)
Cutting off the handle: (7:49)
Reaming the hole for the tang: (8:26)
Handle attaching: (8:56)
The last flattening of the back: (9:06)
Grinding the bevel to get the burr: (9:29)
Removing the burr: (10:10)
Removed burr: (12:20)
Cleaning the cutting edge on the strop: (12:29)
Fresh and sharp chisels: (12:43)
Paper test: (12:48)
Purposed of my skewed chisels: (13:34)
Thanks for watching!: (14:11)