This is a 1996 Toyota Camry V6 Axle remove and install. This works only on the V6 engine, the 4 cylinder is a different procedure.

Tools:
http://amzn.to/2awfJAB 1/2 impact wrench
http://amzn.to/2awcRDO 3/8 ratchet
http://amzn.to/2aDLffr 1/2 30mm deep socket
http://amzn.to/2aE2dh4 1/2 22mm deep socket
http://amzn.to/2aCXKbm 1/2 21mm deep socket
http://amzn.to/2b0vAfI 3/8 17mm socket
http://amzn.to/2b64bsd 17mm wrench
http://amzn.to/2bcOBIZ 12mm socket
http://amzn.to/2b1rS5B 1/2 10mm deep socket
http://amzn.to/2b7LK6O 8mm allen wrench
http://amzn.to/2aJy9kF 3/8 1 inch extension
http://amzn.to/2aEUQWZ 1/2 1 inch extension
http://amzn.to/2b5nNs0 rubber mallet
http://amzn.to/2aRalv6 ball pin hammer
http://amzn.to/2aEVljA diagonal pliers
http://amzn.to/2aweq4t needle nose plier
http://amzn.to/2aJxNKK Tie rod end tool

Parts:
http://amzn.to/2b8XhOj Right axle

Torque specs:
http://amzn.to/2awfDcd 1/2 Torque wrench
48 ft. lbs Axle shaft to flange nut

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook
http://bit.ly/nutzaboutbolts1

and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2

Intro: RavenProDesign
http://www.RavenProDesign.com
Music: Manic Bloom Death and Conversation
   / manicbloom