This video is to help guide the clutch replacement process. Fellow DIYer not a professional. Please use caution and research when following.
I TAKE RISK! CONSIDER AT YOUR OWN RISK! GOOD LUCK

Changing the clutch on a 2007 Suzuki GSXR 600 is a complex task that requires mechanical expertise and tools. Here’s a general overview of the steps involved:‍

1. Gather the necessary tools and parts, including a new clutch kit.
2. Lift the motorcycle to provide access to the clutch cover. Use a suitable stand or lift for this.
3. Drain the engine oil and remove the fairings to access the clutch cover.
4. Remove the clutch cover by taking out the bolts securing it. Be careful not to damage the gasket or any internal components.
5. Once the clutch cover is off, you’ll see the clutch assembly. Remove the pressure plate bolts to access the clutch plates and springs.
6. Take out the old clutch plates and springs, noting their order for reassembly.
7. Inspect the clutch basket, hub, and other components for wear or damage. Replace any parts that show signs of wear.
8. Install the new clutch plates and springs in the same order as the old ones.‍
9. Reattach the pressure plate and secure it with the bolts. Torque them to the manufacturer’s specifications.
10. Replace the clutch cover gasket if necessary and reattach the clutch cover.‍
11. Refill the engine with the appropriate amount of oil.
12. Reinstall the fairings and lower the motorcycle.
13. Start the engine and check for proper clutch operation. Adjust the clutch cable if needed.

Please note that this is a simplified overview, and you should refer to the service manual for your specific motorcycle for detailed instructions and torque specifications. If you’re not experienced with motorcycle maintenance, it’s advisable to seek professional assistance to ensure the job is done correctly and safely.