#taibrastudio #3Dpanelinstallation #detailedprocess
kindly subscribe to our channel thank you
PROCEDURE
1. prepare the wall by scraping or screed if rough
2. arrange a squaremetre of the panel to check the regular patterns
3. Place your gauge or plum above the panel at a starting angle and straightness vertically and horizontally and Mark out
4. apply the adhesive Gum on both panel and wall
5. allow dryness for about 5 to 10 minutes
6. fix the panel gently with hand or using mallet
7. fill out any open space with putty
you are cool to go. thanks for watching. do like and subscribe