This is a quick review of the Easy Threed K7 3D printer that was sent to me by MadetheBest.com so I might give my opinion on it. You will see from the video that this might not be for everyone but I give my thoughts on who and what it is really intended for.

Affiliate link:
https://www.madethebest.com/collectio...


Tush Spool holder mini:
https://www.thingiverse.com/thing:281...

Cura Printer Profile GCode Start
G21 ; metric values
G90 ; absolute positioning
M82 ; set extruder to absolute mode
M107 ; start with the fan off
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 Z2.0 F300 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F300.0 ; Move to start position
G1 X0.1 Y80.0 Z0.3 F300.0 E15 ; Draw the first line
G1 X0.4 Y80.0 Z0.3 F300.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F300.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F300 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F300.0 ; Move over to prevent blob squish