The KAD 7.9" big brake kit with vented rotors is one of the best front disc setups you can buy for the classic mini that is compatible with most 10" wheels. Today we show you what you get with this setup and walk through how we install it.

Show notes:
The KAD calipers in this video https://kentautodevelopments.com/coll...
KAD rotors in this video https://kentautodevelopments.com/coll...
Mintex pads M1144 https://kentautodevelopments.com/coll...
KAD drive flange bolt set https://kentautodevelopments.com/coll...

Stainless steel braided brake lines with this type of setup are strongly recommended
Polaris wheel stud part number: 7517871
How to bleed your brakes:    • How to Bleed Brakes  Easy TwoPerson...  
Wurth paint https://shop.wurth.ca/paintsprimers/...

Table of Contents
0:00 Intro
0:16 Unboxing
5:15 Specifications and weights
9:40 Removal of the stock 8.4" brakes
15:36 Wheel stud removal (NOT necessary for brake kit install)
18:17 Drilling out the drive hubs (this IS necessary for brake kit install)
18:59 Wheel stud install (only if you are changing them)
19:45 Installing the drive hubs to the new rotors
21:20 Reinstalling the rotor hub assembly
23:18 Clearance fixes
25:23 Installing the KAD Calipers
26:49 Reinstalling the brake lines
33:39 Installing the brake pads
35:57 Final steps and bleed
36:34 Proper direction of rotor grooves
38:30 Torque for drive hub bolts and CV nut
38:53 Closing thoughts

FOLLOW US!
SMCO instagram
  / stevestonmotorco  
Mini parts and more on our website www.stevestonmotorco.com