Anet A8 CURA setup
In this video, I am explaining how to setup CURA for slicing 3D models for the Anet A8. This was a request from the comment section of one of the last videos. Have fun!
*** Get the Anet A8 here
https://geni.us/aneta8
*** Cura Start GCODES:
G28 ;Home
M117 Auto level...
;G29 ;auto level. enable only if you have a probe!
G1 Z15.0 F6000 ;Move the platform down 15mm
G0 X0 Y0 F9000 ; Go to front
G0 Z0.4 ; Drop to bed
G92 E0 ; zero the extruded length
G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line
G92 E0 ; zero the extruded length
G1 E1 F500 ; Retract a little
G1 X80 F4000 ; Quickly wipe away from the filament line
M117 Printing...
*** Cura End GCODES:
G4 ; Wait
M220 S100 ; Reset Speed factor override percentage to default (100%)
M221 S100 ; Reset Extrude factor override percentage to default (100%)
G91 ; Set coordinates to relative
G1 F1800 E3 ; Retract filament 3 mm to prevent oozing
G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely
G90 ; Set coordinates to absolute
G1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal
M84 ; Disable stepper motors
THE PRINTERS I USE: https://kit.co/danielcrosslink/the3d...
MY MERCH: https://crosslink.io/shop'>https://crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) [email protected]
FOLLOW ME:
INSTAGRAM / danielcrosslink
TWITTER / danielcrosslink
FACEBOOK / danielcrosslink
WEBSITE: https://crosslink.io
The Music I use: https://crosslink.io/es, AMAZING for YouTubers!
GEAR USED
https://kit.co/danielcrosslink/myvid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.