#photography #mcfarlane #actionfigures
This video focus in on the lighting for Custom Armored Darkseid. Paint apps will be in a later video.
Step 1
Drill into the neck straight into the torso cavity 1/8 bit
Carve a notch at the back of the neck for the wires to set against
Step 2
drill the eyes with vise drill
Step 3
fill perforation with UV resin to create a lens
Step 4
place nano LED in perforation and glue in using UV resin
Step 5
Cut the vest at the side and pull over the shoulders, cut a notch for the multi effect board in the mid back, counter sink it, make it flush / square . Drill a hole for the lead at the top left.
Glue with Fabritac let dry 24 hours
Step 6
attach the lead inside to the micro board and lights
Step 7
fold the vest over the multiword and Cut the openings for the controls
Glue the vest at the side only.
Step 8
attach the USB wire and reassemble your figure
list of materials
2 red nano LED
1 micro board
1 lead
1 multi effect board
1 usb wire
Fabri tac glue
UV resin
Lights for LEGO
Briksmax / Amazon.com
leads and multi effects board
Lightmybricks.com
Micro board and lights
UV Resin Hard Type Glue Transparent Ultraviolet Curing Resin for DIY Jewelry Craft Decoration Making Crystal Clear Solar Cure Sunlight Activated Resin for Resin Mold, Casting and Coating 60g https://www.amazon.com/dp/B07CVB2QW8/...
Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.
INSTAGRAM
photobella_photography
FACEBOOK
/ photobella.visual
Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.