https://www.bananahobby.com/8chblit...
Wingspan 2000mm,
Length 1711mm,
Wing area : 67.25 d㎡
Wing load : 59.47 g/d㎡
Propeller diameter : 18×8in
ESC : Hobbywing 60A
7×Digital metal 17g servo
Brushless motor : 5060 290KV
My rates:
Ailerons :
Low25mm
Mid 28mm
High 31mm
Elevator :
Low 20mm
Mid 25mm
High 32mm
Rudder :
One rate 60mm
Flaps:
No flaps for takeoff (P40s do t require it and advantage is minimal
30mm for windy landing flaps
65mm for no wind landing flaps
CG 36mm in front of the trailing edge of gear cover. Done with plane upside down gear up
So Basically 115mm from leading edge of the wing