Hi folks

Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot)

If you want to help me to expand my squadron or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Thank you very much in advance my friends





Salut les copains

Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus)

Si vous voulez m’aider à agrandir mon escadron ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...

Merci beaucoup beaucoup d’avance les amis




Follow me on Instagram :   / arthuraerorc  
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/


You can buy my things here ⬇
✈ FMS planes ➡ https://www.fmshobby.com/FeYKZYrJINBwLe
Jeti Rx and DS16 ➡ https://www.opaleparamodels.com/fr/ ‪@OpaleParamodels‬
CNHL LiPo ➡ https://chinahobbyline.com/?ref=I5Ew9...
✈ Jets and more ➡ https://www.turbinesrc.com/fr/?aff=4





⚓ Eflite CarbonZ T28 Trojan 2.0m PNP


Wingspan: 1980mm (77.95”)
Length: 1620mm (63.78”)
Empty weight with Rx, without LiPo : 4660gr
Flying Weight CNHL 6S 5000 70C (830g) : 5490g
Motor : 5040 500KV outrunner 14 pole
ESC : Avian 70A Smart 6S LiPo IC5 or EC5
Prop : 14.75 x 10
Servos Metal gear : 25g x 6pcs + one 16g for nose steering
Recommended Battery: 6S 32007000mAh
Radio : 6ch mini

❌ Book CG : 175185mm from wing Leading edge where fuselage meets.
MAIDEN at 190mm With CNHL 6S 5000 70C (830gr) placed at the rear edge of plywood


Rates (my low / book’s low / 100%) :
Ailerons : 50% (23mm) / 70% (32mm) / 100%
Elevator : 50% (15mm) / 70% (19mm) / 100%
Rudder : 40% (20mm) / 100% (40mm) / 100%
Flaps : First notch 40mm with 2mm down elevator / second notch 80mm with 3mm down elevator


⏰ Flights with timers and voltage (checked few minutes after landing):




0:00 Intro
0:20 Balance prop
0:50 Decals…
5:15 Engine
6:44 Cowl
7:22 Prop mounting
8:13 Rudder
11:00 Elevator
13:51 Wing
16:15 Plug Servos in JETI Rx
19:10 Start up JETI DS16
20:00 Flaps settings
23:31 Center elevator linkage
24:13 Gyro settings
26:15 Rates settings
31:47 Rx velcro
32:06 CG setting
33:30 Landing Gear sequence
34:00 Tail sit method
34:42 Placement CNHL 6S 5000 70C 830g
35:12 Please Subscribe
36:15 Details photos






#eflite #t28 #rcplane #trojan #warbird #jeti #opale #radiocontrol #giant #modellbau #new #foam #rc #aviation #release #assembly #build