See how the AUG SOF COMPENSATOR from Clawgear is being installed. You can get it online at: https://www.clawgear.com/en/AUGSOFC...

B&T Quick Detach
Allows the operator to enhance the weapon system with B&T QD suppressors.

Breacher Spikes
These sharp and hardened steel spikes allow the user to destroy barriers in CQB situations.

Expansion Chamber
The construction guides the exhaust gases in optimal direction to reduce recoil and muzzle flip.

Counter Nut
Mount the AUG SOF Compensator with the counter nut to ensure a secure fit on the barrel.

Closed Bottom
Prevents blown up dust and debris.

Compatibility: Steyr AUG A1/A2, AUG A3, AUG A3 SF, AUG P, AUG Z with thread, AUG Z A3 with thread, AUG LMG variants, AUG SA variants, F88 Austeyr, Thales EF88 / F90, MSAR STG556

Installation: Dismount existing muzzle devices and clean the thread surface. After applying a drop of oil on the thread, screw the counter nut counterclockwise on the barrel until it stops. Screw the compensator counterclockwise on the barrel until it touches the counternut then turn it back until the Claw Gear logo faces upwards. Tighten the counternut towards the compensator by hand and use a 19 mm wrench to secure the position.