In this video I start construction of the wing. The wing construction starts with laying down the main wing spar, followed by placing the ribs and upper spar. The wing has a symmetrical airfoil so both wings can be constructed on the same half wing plan.

The Balsa USA Smoothie kit is a 40 class (size) sport plane and has been around for a long time and is still readily available on the Balsa USA website. For this balsa kit build I will use traditional rc plane kit build techniques.

In each build series episode I will focus a different aspect of the build including the wing, fuselage, tail section rudder and elevator, engine mount, landing gear, tail gear, engine set up (OS Engines .46 AXII), fuel tank, servos and receiver (Futaba), control rods and horns, Monokote covering, carving and shaping wood, using CA glue (Zap CA glue, Starbond CA glue), epoxies (JB Weld, Bob Smith Industries, Zpoxy finishing resin), tools and everything thing else involved with building a radio control plane kit (RC Airplane kit).

I have been building, flying, crashing, modifying, and repairing radio control planes for many years and enjoy sharing what I do with the radio control plane community, so I started RC Plane Tech channel.

My methods of building rc plane kits, maintenance, running engines and equipment, and flying are not the only way to do things. I always recommend checking other sources and learning from others. I do not consider myself an "expert" but just a guy who has been doing this stuff for a while and enjoys sharing what I know and learning from others.

I fly with Futaba radio equipment, OS Max engines and Saito engines, Master Airscrew Propellers and APC propellers, Sullivan RC fuel tanks and hardware, Dubro RC fuel tanks and hardware and typically run Morgan Omega and Powermaster glow fuels. I fly ARF rc planes, but I also really like to build rc plane kits including Balsa USA RC kits, House of Balsa, Royal and Marutaka RC kits, Sig RC Kits. I use Monokote and other RC covering fabrics.