In this video I continue with assembling the fuselage, including bringing the back half together of the fuselage by setting the cross braces and aft former, and installing to control rod tubing. I use Sullivan GoldNRod 256 control rods and tubing. I use 30 minute epoxy and CA glue to construct the pieces.

The Balsa USA Smoothie kit is a 40 class (size) sport plane and has been around for a long time and is still readily available on the Balsa USA website. Balsa USA also have a larger version of the plane called the Balsa USA Smoothie XL. I will be using an OS Engines 46 AX2 glow engine to power it and Futaba S3004 servos, receiver, and 6J transmitter.

For this balsa kit build I use traditional rc plane kit building techniques. In each build series episode I will focus a different aspect of the build including the wing, fuselage, tail section rudder and elevator, engine mount, landing gear, tail gear, engine set up (OS Engines .46 AXII), fuel tank, servos and receiver (Futaba), Sullivan control rods and horns, Monokote covering, carving and shaping wood, using CA glue (Zap CA glue, Starbond CA glue), epoxy (JB Weld, Bob Smith Industries, Zpoxy finishing resin), tools and everything thing else involved with building a radio control plane kit (RC Airplane kit).

I have been building, flying, crashing, modifying, and repairing radio control planes (RC Planes) for many years and enjoy sharing what I do with the radio control plane community, so I started RC Plane Tech channel for fun. I am not an expert, there are many different techniques to building radio control planes. A good way to learn about flying and building rc planes is to see what others are doing, that's what I do and that's why I like to share what I do. Thanks for watching my channel. Have fun!