Bango v2 is an answer to many request for another simple plane design and a trainer for beginner. It was designed to surpass Bango v1 performance. The main goal is still the same, which is a trainer plane that is easy to fly and can withstand hard landing even crashes. Because I know beginners usually afraid to crashing their plane, so they held back. That's why I made Bango 2 so new pilots don't have to worry damaging their RC plane when hard landing or crashing. By moving the motor the the center and on the back of the plane make it free to propeller strike to the ground. Also build the vertical stab with 2 layer of foams gives Bango 2 more rugged than Bango 1. Rudder and elevator servo placement that are outside the fuselage also an ease for beginner to install. Bango 2 also equipped with detachable landing gear, if you hard landing with landing gear attached, it will detached by itself and will not damage the fuselage, because the landing gear just held by 2 rubber bands.

SUBSCRIBE and Like to support this channel
#bango #rctrainerplane #buildvideo

You can download the plans on the link below :
A4 plans : https://paperreplika.com/RCplans/PR_...
A0 plans : https://paperreplika.com/RCplans/PR_...
A3 Decal : https://paperreplika.com/RCplans/Ban...

Build instructions :
https://paperreplika.com/index.php/r...

DONATE via Paypal : [email protected]

Playlist :
02:06 Plans Preparation
04:06 Fuselage
06:34 Stabilizers
07:32 Covering the Fuselage
10:36 Wing
13:13 Wing Mounting
14:13 Landing Gear
16:32 Aileron
17:31 Servos
21:30 Installing motor
23:32 RC Electric Plane Basic Knowledge
45:10 Maiden Flight
54:27 Review
57:03 Crash Compilation
59:36 Next Project?

Specs :
1. Wingspan 1450mm / 57 inches
2. Flying weight : 835 grams/ 29.5 oz
3. Wing loading : 33.4 g/dm2 10.9 oz/sq.ft
4. Wing cube loading : 6.7
5. Wing Area : 25 dm2 / 391 sq.in
6. CG : 4.5 cm from LE

Electronics
Turnigy 2826 2200kv brushless motor
ESC 40A
Battery Lipo 3S 2200mah
4 plastic gear 9 gram servos
Propeller : 6x4

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm, 9 mm Plywood
3. hot glue + Epoxy Glue
4. 3mm bicycle wheel spoke wire
5. white packing tapes https://amzn.to/3ttYTMp
6. chopsticks
7. Plastic straw

Tools :
1. Covering iron https://amzn.to/38YZyMh
2. Heat gun https://amzn.to/3A1cvkR
3. Hot glue gun https://amzn.to/38XyrkY