1. Put the ADXL345 acceleration sensor on the breadboard
2. Connect the Vcc and GND pin of the sensor to +5V and GND on Arduino respectively
3. Connect SDA and SCL pins to A4 and A5 respectively.
4. Connect the Vcc and GND pin of 16x2 i2c LCD to Vin and the GND pin of Arduino
5. Connect the SDA and SCL pins of the LCD to the extended A4 and A5 pins which present above the AREF pin
6. Upload the code (the code is pinned in the first comment)

#shorts #shortsvideo