I'm making my first board for dockstart foil pumping as my actual board is too big. (using a pocket kitefoil board, 135cm)
This technique can also be used for a kitefoil board.
IN this part I'm doing the layup of the deck by infusion.
kitefoil board making
dockstart foil board making
how to make your own board
how to make you own kiteboard
dockstart board making: how to
how to make you own dockstart board
surfboard making with infusion technique
how to make a surfboard
infusion technique
carbon
epoxy
DIY foil pumping board
How to make a Dockstart board
Making A Homemade Foil Board
How To Make Your Foilboard step by step
How to Build a Foil Board
00:00 carbon layup : cutting the fabric
00:10 chosen fabrics
00:33 layup scheme on the board
01:06 putting everytingin the vacuum bag
01:31 closing the vacuum bag
01:54 sealing the vacuum bag
02:36 connecting the epoxy infusion hose
03:09 connecting the vacuum hose
03:19 adding vacuum and getting rid of wrinkels
04:01 mixing and degassing the epoxy
04:47 starting the infusion
05:43 result after curing
06:00 unpacking the board after curing
06:40 the end result
07:01 cutting away the excess of carbon fibre
07:40 finishing the edges with 80 grid sand paper
07:55 end result of the board, the rail
08:32 next step: installation of the mast boxes.