Hi folks
Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot)
If you want to help me to expand my squadron or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...
Thank you very much in advance my friends
Salut les copains
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus)
Si vous voulez m’aider à agrandir mon escadron ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc...'>https://www.paypal.me/arthurjanin?loc...
Merci beaucoup beaucoup d’avance les amis
Follow me on Instagram : / arthuraerorc
⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/
You can buy my things here ⬇
✈ Eflite D18 ➡ https://www.turbinesrc.com/en/traine...
Jeti Rx and DS16 ➡ https://www.opaleparamodels.com/fr/ @OpaleParamodels
CNHL LiPo ➡ https://chinahobbyline.com/?ref=I5Ew9...
✈ Jets and more ➡ https://www.turbinesrc.com/fr/?aff=4
✈ Eflite Beechcraft D18 1.5m PNP
https://www.turbinesrc.com/en/traine...
Wingspan: 1504mm (59.2n)
Overall Length: 1064mm (42in)
Empty weight with Rx without LiPo : 1858gr
Flying Weight CNHL 4S 3300 40C : 2230g
Motor Size: 3226 KV930 outrunner
ESC: Avian dual 40A 3 or 4S LiPo IC3
Servo: 14g x 6pcs
Recommended Battery: 4S 4000mAh
Radio : 6ch
❌ Book CG : 4252mm from wing Leading edge at wing joint (main wing and wings tips), MAIDEN at 52mm ! With CNHL 4S 3300 40C (372gr) ???
Rates (my low / book’s low / book’s high) :
Ailerons : 10/12/18mm
Elevator : 10/13/18mm
Rudder : 10/15/20mm
Flaps : 20/32mm with 7% (2mm) down elevator
0:00 Intro
0:30 Main Wing
2:20 Wing tips (CG marks)
4:27 Tail (elevator+rudder)
9:52 THE END
10:20 Wires are stuck
11:08 Plug into Receiver
14:37 Reverse flaps
15:07 Reverse ailerons
15:29 Flaps settings
18:30 Neutral position elevator
20:02 My triple rates
25:21 Mix flaps to elevator
27:27 Flaps curve to avoid that NOISE !
27:54 Everything is flush
28:15 Doing the CG 52mm from leading edge at the wing joint (junction central panel and wingtips)
30:14 Waiting for the good weather
30:38 Please Subscribe
31:10 Details photos
#eflite #beechcraft #rcplane #d18 #warbird #jeti #opale #radiocontrol #generalaviation #modellbau #new #foam #rc #aviation #release #assembly #radio