This model airplane is a trainer, an evolution of the project we made some time ago, the Joytrainer, that airplane was big and cool, it was based on the Simple Storch by Flitetest, some people wanted to have a smaller version, also I thought it should be compatible with cheaper components, and so I did it. The new model is portable and simple to make.

0:00 Intro
0:52 plans
1:53 cutting the material
2:51 shaping
4:14 glue the fuselage
7:52 control surfaces
8:44 empennage
9:14 wings
12:51 motor
14:26 connectors
14:57 control horns and servos
17:21 paint
19:39 strap the battery
20:17 landing gear
22:43 push rods
23:59 center of gravity
24:43 flights


▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
List of components used:
2206 or similar motor with 1600KV – 2600KV.
5 “ 7” propeller (use the one recommended by the motor manufacturer).
Recommended battery for beginners and stable flights: 2S from 2200 – 4000 mAh. (Do not fly on windy days with this configuration). For more power: 3S from 1500 – 3200 mAh. (You can fly on a bit windy days and do maneuvers).
X4 micro servos.
ESC of 30A with BEC.
Radio and receiver of a minimum of 4 channels.
X4 20 cm servo extensions.

⭐⭐ For a complete list of materials and components + download the plans go to the post: https://joyplanes.com/en/joytrainerm...

⭐⭐ Take the course to build this project https://joyplanes.com/en/minicourse...
This course will show you everything in detail + access to our private Discord channels for members of this course.
Use the coupon: IMFIRST10
and get 10% off, only for the first 10 to buy.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

⭐⭐ Join our new Discord server ⭐⭐
☛   / discord   ☚

Become one of us:
https://goo.gl/zKQ706

Facebook
  / joyplanesrc  
Instagram
  / joyplanes  

#JoyplanesRC #HobbyRC