Build this USB Loadcell handbrake! This is an extremely easytobuild DIY sim racing project which will give you a solid product once you're done! So go ahead and give it a bash!

Resources (Cutting Template, Code, Wiring Diagram): https://drive.google.com/drive/folder...

Parts list:
3mm Steel waterjet cut template: Found in resources
3mm Marine ply inners lasercut: Found in resources
Rosejoint/Rod end (1): https://za.rsonline.com/web/p/roden...
M6x60mm (1): These can be found at most hardware stores
M3x8mm Cap screws (8) https://za.rsonline.com/web/p/socket...
Mild steel M3x40mm standoffs (4)
https://za.rsonline.com/web/p/stando...
6mm Aluminium rod (300mm) https://www.amazon.com/dp/B07KJ71T13/...
Quickdrying epoxy for the handle and backends
Some paper clips
furniture pads these are found at most hardware stores
rubber washers these are found at most hardware stores

Electronics:
20kg Load Cell (1): https://www.amazon.com/dp/B096FKK8KS/...
HX711(1): Included above
Pro Micro (1): https://www.amazon.com/dp/B07PHK8SMR/...