I build a 1x10 gravel/cross bike using vintage road bike frame. The drivetrain is a single 36 tooth wide/narrow chainring on the front and a 1140 tooth cassette on the back. I use a Shimano 105 (5701) rear derailleur and Shimano 5600 brake/shifters (brifters). I also converted the frame to use recessed mounted Tektro R316 brakes. The frame was from a Ross 290S Signature Model with Ishiwata triple butted tubing. The wheels are ALEXRIMS DM18 WHEELSET w/ Shimano HBRM40 front hub, Shimano FHRM408S rear hub. The finished bike weighed about 25.5lbs.

Solodrive 104BCD Single Chainring For 9/10/11Speed(Narrowwide):
https://www.amazon.com/exec/obidos/AS...

ZTTO MTB Wide Ratio Cassette 10 Speed 1140t:
https://www.amazon.com/exec/obidos/AS...

ZTTO Rear Derailleur Hanger Extender:
https://www.amazon.com/exec/obidos/AS...

CST Cultivator Cycle Cross Tires 700 x 32
https://www.amazon.com/exec/obidos/AS...


Gear Ratio Calculator:
http://www.bikecalc.com/gear_ratios

How To Make A Headset Cup Press/Install Tool:
   • How To Make A Headset Cup Press/Insta...  

Cold Setting A Bike Frame:
   • Cold Setting A Bike Frame (126mm to 1...  

Square Taper To GXP Bottom Bracket Replacement:
   • Square Taper Bottom Bracket To GXP Bo...  

GXP Bottom Bracket Install Do You Need To Use Spacers?
   • GXP Bottom Bracket Install  Do You N...  

Install Recessed Mounted Caliper Brakes On Vintage Bike Frame
   • Install Recessed Mounted Caliper Brak...  

▶ SUBSCRIBE & HIT THE http://bit.ly/SubRJTheBikeGuy

And please give my video a thumbs up

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com