All the airframe part is complete, all I need to do is installing all the electronics. Because the flying weight will way off my target from 7,5 kg to 10 kg I will need to use more powerful battery from 3S to 4S. I also need to repair the main landing gear to make it more rigid on the fuselage construction. The airframe itself is 8 kg, I will use 4x DXW 3536 1200kv. When this video is release the plans is not ready yet so I still need to preparing it, maybe it will ready in a week. I will post it on community tab on my channel when the final plans is ready.

SUBSCRIBE and Like to support this channel
#boeing747 #rcplane #buildvideo

You can download the plans on the link below :
A4 Plans : https://paperreplika.com/dfiles/rcpl...
A0 Plans : https://paperreplika.com/dfiles/rcpl...
A3 Winglet decal : https://paperreplika.com/dfiles/rcpl...

Build instructions :
not yet available (web maintenance)

DONATE via Paypal : [email protected]

Join this channel to get access to perks:
   / @juliusperdana  

Specs :
1. Wingspan 4000mm / 157.5 inches
2. Flying weight : +/ 10 kg 352.7 oz
3. Wing loading : 42.4 g/dm2 13.9 oz/sq.ft
4. Wing cube loading : 2.8 (Glider = under 4)
5. Wing Area : 236.06 dm2 3559 sq.in
6. CG :

Electronics
DXW 3536 1200kv x 4 https://amzn.to/3CkPUQT
ESC 50A x 4 https://amzn.to/3lwr89O
4 standard servo
3x 9 gram metal gear servo https://amzn.to/2X5GdXH

Materials :
1. 5mm + 3mm Depron/ Polyfoam
2. 3mm Plywood
3. 32 micron/ 1 mil glossy laminating film https://amzn.to/2XcNghb
4. hot glue, foamsafe glue, CA glue
5. grey packing tape

Tools :
1. Hot glue gun https://amzn.to/3BXwfGs
2. Heat gun https://amzn.to/3lawF5H
3. Covering iron https://amzn.to/3k2kM2s