Whew, the title is lengthy! I've been hoarding this old water tank redwood for quite a few years. It's hard to grow vegetables in the cold Lake Tahoe region of California, and we wanted a way to get them year round. So, I decided to design a small test hydroponics / aquaponics system, and build a shelf to contain it all. This build is mainly about the shelf I made it for "free" from an old water tank, using my CNC router to cut some dovetail joinery, all without actually using a dovetail bit. My new vertical work table did come into play for cutting out the pin boards! I'm not really planning on talking about the actual grow setup; I haven't worked out all the details on it, but stay tuned for some future video where I may (or may not) talk about it.
Download the Fusion 360 CAD File:
https://www.corbinsworkshop.com/shop/...
/ corbincncwoodworking Corbin's CNC Woodworking Group on Facebook!
The file has two CAM toolpath setups; one for the pins cut vertically, and another for the tails cut horizontally. I used really slow toolpaths to avoid chipout; redwood is incredibly soft and prone to chipping out, and I also had a lot of vertical unsupported area when cutting the pins. Download the file to get a feel for how I setup everything; one key point is to make sure the same side is used to reference the joinery.
Low profile hold down toe clamps:
https://www.corbinsworkshop.com/shop/...
Vertical Spoilboard: • The Ultimate CNC Vertical Work Table!...
Bit: https://amzn.to/4aIjEJF
Feeds and speeds noted in the video and in the Fusion 360 file.
My machine is a 4'x8' Avid CNC Pro. https://www.avidcnc.com
Corbin Dunn
https://www.corbinstreehouse.com // Blog & Website
https://www.corbinsworkshop.com // CNC Files, Products, Woodworking Portfolio
Timestamps:
0:00 Intro
0:34 Wood prep
1:07 Joinery Concept
1:28 CNC Dovetail Pins
2:32 CNC Dovetail Tails
3:31 Mess of a glue up
3:58 Finishing
5:04 Adding Shelves
5:49 Final Shots
#cncwoodworking #cnc #avidcnc
Some other notes are talking about my CNC router, cnc woodworking tips, cnc dovetail joinery, cnc projects, cnc bits, and making a shelf with my CNC wood router.
** Some links are Amazon Affiliate links where I make a small commission at no cost to you if you make a purchase **