See all the parts and tools used in the video here:

Parts:
Bearing and Seal Set Large: https://www.tomoshop.nl/engb/bearing...
Stud set cylinder: https://www.tomoshop.nl/tapeindsetm7...
Gasket set New: https://www.tomoshop.nl/pakkingset50...
Gasket set Old: https://www.tomoshop.nl/pakkingset50...
Engine bolt set A35: https://www.tomoshop.nl/completemoto...
Diaphragm gasket A: https://www.tomoshop.nl/membraanpakk...
Liquid gasket: https://www.tomoshop.nl/vloeibarepak...

Tools:
Piston plug: https://www.tomoshop.nl/zuigerstop.html
Vice jaws soft: https://www.tomoshop.nl/bankschroefb...
Crankshaft plate: https://www.tomoshop.nl/krukasonders...
Hot air gun: https://www.tomoshop.nl/engb/heatgu...
Gasket scraper: https://www.tomoshop.nl/pakkingschrap...
Torque spanners: https://www.tomoshop.nl/#31db/embedde...
Stud assembly: https://www.tomoshop.nl/tapeindmonta...
Bearing puller set internally: https://www.tomoshop.nl/engb/ballbe...
Front sprocket nut with retaining ring: https://www.tomoshop.nl/moervoortand...
Front sprocket washer: https://www.tomoshop.nl/borgringvoor...
Pipe spanner Gear: https://www.tomoshop.nl/voortandwiel...
Kickstart spring: https://www.tomoshop.nl/kickstartveer...


Welcome to Tomoshop, the shop where everything revolves around Tomos! Also our youtube channel will be nothing but Tomos, showing new products, testing, boosting and of course riding! Presented by the Madman of the Moped World: Stijn!

With over 10,000 different parts, we are the biggest on the market so always check https://Tomoshop.nl for all your Tomos Parts!

SERIES:
The Exhaust Test: https://bit.ly/UitlaatTest
Blue to Yellow License Plate Testing:https://bit.ly/BlauwNaarGeel
1 Minute Howto: https://bit.ly/Tomos_Howto

0:00 INTRO EXPLANATION
0:32 1 Disassemble engine from frame
1:43 2 Remove clutch & ignition cover
3:43 3 Dismantling original manifold and cylinder
3:54 4 All parts and supplies that you need
5:24 5 Remove front sprocket from Tomos A35
5:48 6 Split crankcases & crankshaft
6:08 7 Crankshaft inspection for bearing play
6:40 8 Remove studs/threaded ends
7:27 9 Remove bearings and pull from blind hole
10:37 10 Mount crankshaft bearings
12:11 11 Assemble crankcase bearings Tomos A35
12:30 12 Grease and gasket free crank cases
13:13 13 Mount crankshaft in crankcases
15:15 14 Torque the bolts!
16:20 15 Tip: Centring the crankshaft
16:44 16 Mount new threaded studs
17:14 17 Mounting piston and cylinder on Tomos A35
20:41 18 Assembling crankshaft retaining rings
22:41 19 Assemble main shaft and kickstart parts
24:06 20 Assemble clutch housing and rings
26:03 21 Assemble and seal clutch cover bearings
27:48 22 Assemble reedvalve and manifold with renewed gaskets
28:42 23 Fitting ignition and timing Tomos A35
30:26 24 Fit Tomos A35 Front sprocket with new nut!
32:24 25 Assemble kickstart Tomos A35


#Tomos #Tomoshop #moped