I'm building my own 3D Printer and this is the first 'update' video, just so you know where I'm working on! If the 3D printer is fully finished, ofcourse there will be a full DIY video but these are just updates.

Materials I used:
12V 360W Power supply: https://www.1233d.nl/1233DVoeding...
BigTreeTech SKR mini E3 v3.0 32 bit mainboard: https://www.1233d.nl/BigTreeTechSKR...
BigTreeTech TFT35E3 v3.0.1 touch screen controller panel: https://www.1233d.nl/BigTreeTechTFT...
Switch, fuse holder: https://www.1233d.nl/1233DEurocha...
Cable shoes assortiment box: https://www.hubo.be/nl/p/carpointkab...
Shrink tubes I used: https://www.gotron.be/setthermische...
Fuse assortiment box: https://opencircuit.be/product/zekeri...

The 3D printer on the thumbnail was made by Ai ;)

Video chapters:
00:00 Intro
00:11 Adding cable shoes to the wires
00:21 Connecting the wires to the switch
00:27 Installing the fuse
00:42 Connecting wires to the power supply
00:56 BTT SKR Mini E3 V3.0 Mainboard
01:24 BTT TFT35E3 V3.0.1 touch screen
02:08 Electronic circuit
02:11 Testing the installation
02:19 Firmware which was already installed on the mainboard

Link to free Cura Profiles: https://www.thingiverse.com/thing:524...
Via the link (on Thingiverse) you can download all the profiles + the test owl I got with the Anycubic Vyper.

Watch the unboxing + review video of the Anycubic Vyper:    • Unboxing + Review Anycubic Vyper (Eng...