Today we have a cool homemade vacuum cleaner.
If you don’t have an old vacuum cleaner, you can watch my other videos on this topic:
✅ DIMMER from the Chinese module    • Регулятор оборотов 220V для электроин...  
✅ Soft start from IRON    • ПЛАВНЫЙ ПУСК ИЗ УТЮГА ДЛЯ БОЛГАРКИ  с...  
✂ ✂ ✂
MY NEW CHANNEL! The 3rd of February will be open at 15.00
✂ ✂ ✂
☑ Buy DIMMER WITH POWER OF 4000 W on Aliexpress http://ali.pub/2ubeel
Emery, industrial vacuum cleaners or cyclones, spray guns and blowers are assembled from old vacuum cleaners. But in fact, only two things can come out of really useful things from a vacuum cleaner. Extension cord winding mechanism. And a dimmer is a power regulator for a power tool with which you can adjust the temperature of a soldering iron, iron, nichrome filament, incandescent lamps, and so on ... Power regulator an indispensable device that you will use in the garage and at home.
Today we will assemble a power regulator with our own hands.
For homemade work, I only need a vacuum cleaner power regulator board with a variable resistor.
When an industrial vacuum cleaner appeared in my garage, this one migrated to the attic. Therefore, he is so dusty ...
There is one trouble ... The slide resistor board is broken okay. First I’ll figure it out, then I’ll decide how to deal with it ....
Now look. We will connect a cord with a plug to the white wires of the power regulator ..
And to the blue plug the socket ...
Slider resistor board is broken. I soldered the wires directly to the board .. I wanted to use a ten ampere external socket, but with a 6 amp it would be no less cool homemade. Drill holes on the old cover ...
He made a cutout under the slide resistor in the case. He put the resistor on the hot glue ... The power regulator from the vacuum cleaner should not get warm ...
Twisted the wires, tinned. And insulated with heat shrink. To prevent the wire from being accidentally pulled out of the power regulator, I wound a little tape on the edge ...
I put basalt cotton wool between the board of the power regulator of the vacuum cleaner and the outlet so that nothing hangs.
The body of a cool homemade product was twisted with electrical tape for the duration of the tests ...
At the end of the assembly, he conducted several tests of the power regulator ...
The minimum voltage on a small grinder power regulator showed about 80 volts
The current strength at minimum power for a cool homemade product dropped to 1.2 Amps.
But under load, the power rose significantly.
It turned out to be a really cool homemade from a vacuum cleaner, on which I did not spend a single penny and made it with my own hands. You can also make a cool power regulator from a vacuum cleaner with your own hands and an extension cord with a cord winding mechanism.
By the way, the idea of ​​a vacuum cleaner belongs to one of the subscribers.
That's all dear friends. For you, the author of the channel 1000 DIY's and Advice tried 1000 DIY AND TIPS
Do not forget to leave a like or dislike and subscribe to my channel.
Now you know how to make a cool homemade vacuum cleaner with your own hands.
✂ ✂ ✂
How to make money on Aliexpress Affiliate program of EPN EARNINGS on Aliexpress Affiliate ePN http://ali.pub/2ubyb4