Hello there, this is mildly cursed. I didn't have the right connectors so the wiring's pretty rough but I'm really just interested in getting this old cr30 printing with its new Micro Swiss Revo NG angled at 22.5 degrees to both the bed and the 3d printing plane.

I'm a big fan of early testing and it's absolutely wise to test with nonfinal parts so that you can identify problems early.

For instance this has the original fan shroud on it, which means it can only print about 25mm tall before the print hits it... but it's doing a great job cooling, so print on!

I calibrated the extruder and bed with my laser eyeballs and that'll need to be updated... but the print continues to recover and there aren't any clearance problems so this test is a win! Belt adhesion's better and I'll be back with a functional fan shroud and decent calibration so happy printing!



Support the project!
  / printshift  

Check out our website!
https://printshift3d.com

Project GitHub PrintShift is open source! Build along and make your Mini a proper factory!
https://github.com/paenian/PrintShift