This jet is sponsored by my friend who owned a Radio Control parts store (Dunia Aero), he provided all the electronics, including 70mm EDF, retract landing gear, ESC and Lipo Battery. You can visit his stores on 2 links below. We both decided to build Mirage 2000 that have 2 seats, because it looks way cooler than the single seat version. At this project I committed to use foam safe glue for the primary glue for saving weight reason, but in the reality looks like foam safe glue was not suitable for my building style. It's too slow and too weak, but mainly too slow. So this project release is very late. Also the maiden flight was not very smooth to achieved, many days of trial and error, but finally it did fly, gracefully. It achieved by replacing the EDF with pusher prop motor. We plan to use more powerful EDF with 6S in the future, and will update it to you when it happen.

SUBSCRIBE and Like to support this channel
#mirage2000 #rcplane #buildvideo #radiocontrol

You can download the plans on the link below :
A4 Plans : https://paperreplika.com/RCplans/PR_...
A0 Plans : https://paperreplika.com/RCplans/PR_...
A3 Decal : https://paperreplika.com/RCplans/Dec...
A4 Camo Pattern : https://paperreplika.com/RCplans/Cam...

Build instructions :
https://paperreplika.com/index.php/r...

DONATE via Paypal : [email protected]

RC Plane Parts Stores :
Tokopedia Dunia Aero : https://tokopedia.link/dy5owCUdPeb
Shopee Dunia Aero : https://shopee.co.id/sandaljepit.for....

Join this channel to get access to perks:
   / @juliusperdana  

Playlist :
00:00 Intro
01:06 Plans
01:24 Build the Wing
06:19 Fuselage
10:30 Merge Wing to Fuselage
14:33 Nose Section
18:09 Vertical Stabilizer
18:28 Covering
24:07 Color Scheme
26:43 Canopy & Decals
31:12 Battery Tray
33:31 Servo Linkages
35:05 Taxi Test
36:08 Maiden Flight
44:06 Review

Specs :
1. Wingspan 950mm / 37.5 inches
2. Flying weight : 1480 grams/ 52.2 oz
3. Wing loading :33.2 gram/dm2 10.9 oz/sq.ft.
4. Wing cube loading : 5
5. Wing Area : 44.6 dm2 / 691 sq.in.
6. CG : 4.5 cm to the back from 2nd seam, which started from air intake

Electronics
(Pusher)
Tested with 2836 2700kv brushless motor with 6X4 propeller
80A ESC
Battery Lipo 4S 2200mah
3 metal gear 9 gram servos (micro servo)

(Recommended EDF)
FMS 70mm EDF 12 blades
80A ESC
2X 3S 2200mah / 6S 2200mah

Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood / PVC foam board
3. 0.5mm Mica Plastic
4. hot glue, UHU glue, CA glue
5. packing tape/ laminating film https://amzn.to/3ttYTMp

Thanks to :
Kanaya Fellicita (cameragirl)