New to Fusion 360? This is a brand new 2023 version of Day #5 of "Learn Fusion 360 in 30 Days for Complete Beginners" the most popular Fusion 360 course on the internet! Get Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses

Full course on YouTube: https://bit.ly/30daysUpdated

SUPPORT KEVIN'S TUTORIALS
Patreon ➞   / productdesignonline  

COMPUTE TYPES EXPLAINED ➞ https://productdesignonline.com/d5
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist

TOP FUSION 360 PLAYLISTS
http://bit.ly/learnfusion360
http://bit.ly/woodworkerplaylist
http://bit.ly/3Dprintingplaylist
http://bit.ly/sculptplaylist

SUBSCRIBE (& Hit the Bell!)
http://bit.ly/subrightnow

TIMESTAMPS
00:00 Day 5 Model an Ice Cube Tray in Autodesk Fusion 360
00:36 Sketch the overall shape with a rectangle
01:21 Create New Sketch on Planar Surface in Fusion 360
02:38 How to Extrude Cut in Autodesk Fusion 360
03:29 Add Taper Angle to Extrude in Fusion 360
04:19 How to use Rectangular Pattern in Fusion 360
05:54 How to Shell with more than one Face in Fusion 360
07:10 Create a Midplane Construction Plane in Fusion 360
07:37 Sketch the Lip of the Ice Cube Tray in Fusion 360
08:46 Sweep the Lip of the Ice Cube Tray in Fusion 360
09:23 Next Lesson in this course

—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion360tutorial #autodeskfusion360 #autodesk