#cncfoamcutter #hotwire
When you start out CNC Foam Cutting you’ll soon discover that software can be a bit of a challenge.

There are a couple of free options that are OK but the best software, in my opinion, is DevWing Foam 2.

DevWing Foam 2 has it all covered including making complex wings, dihedral, washout, leading edges, trailing edges, spars, flaps, ailerons, lightening holes, wing ribs and tips. And you can make several wings in one cutting job. Which saves on foam.

DevWing Foam 2 is the latest software from DevCad to create foam wings for RC aeroplanes. It was released in Dec 2019

If you are looking for FREE SOFTWARE then check my website https://www.rckeith.co.uk/foamwingf... on Free software for CNC Foam cutter which covers Jedicut and a few others

Download DevWing Foam 2 from here http://www.devcad.com/download/DevWin...

This is Part 1 of a 4 part tutorial. See video for details of Part 24

Part 1 explains the design phase showing how you can create wings from plans or using an image.

Part 1 covers the following:
00:00 Introduction
10:13 Wing planform design
25:41 Wing planform from and image
33:38 Wing Panels/Sections
34:19 Aerofoils including washout and dihedral
42:46 Sheeting
44:39 Trailing and Leading Edge
47:19 Spars
55:04 Ailerons
58:14 Lightening holes
01:02:51Computing the weight of the wing


If you would like to build your own Hot Wire CNC Foam cutter for around $200/£160 then I have free eBook, Plans(small charge) and a 4 part video series explaining how to build your own.

https://www.rckeith.co.uk/howtobuil...