In this video, i have shown the final setup of our 3d printer and run our first 3d print on this printer.

we start with placing the glass bed on top of the heated bed and secure it using binder clips.

then calibrate the bed level using a piece of normal a4 size printer paper.

finally we print our first 3d object which is a calibration cube from thingiverse.

the first print did not turn our well, as the fan was off and the bed adhesion was not proper.

after cleaning the bed and turning the cooling fan on. i printed the cube again and this time it turned out better than the previous one.

i also printed a benchy which took about 1 hour 32 minutes. and the result was acceptable.

there are many improvements to be made on this printer, which i will be doing along the way. also i will be doing tutorial videos on how to operate various features of the printer and to improve quality of prints.

Detailed Blogs:

Part 1: https://superbtech.in/howtomake3d...
Part 2: https://superbtech.in/diy3dprinter...
Part 3: Coming Soon

Part Links:
3d printed plates: https://bit.ly/3lYBEH0'>https://bit.ly/3lYBEH0

Frame:

2020 v slot silver profile: https://s.click.aliexpress.com/e/_AfevMf
2040 v slot silver profile: https://s.click.aliexpress.com/e/_AaQvCX
corner bracket 4 pcs set: https://s.click.aliexpress.com/e/_AOh4wr
ss button bolt: https://s.click.aliexpress.com/e/_AmeWQR
m5 sliding nut: https://s.click.aliexpress.com/e/_APaLMJ'>https://s.click.aliexpress.com/e/_APaLMJ
rubber feet set: https://s.click.aliexpress.com/e/_AoEFLV

Mechanical Parts:
V wheel Set: https://s.click.aliexpress.com/e/_9Jlqaf
3d printed plates: https://bit.ly/3lYBEH0'>https://bit.ly/3lYBEH0
gt2 belt pulley set: https://s.click.aliexpress.com/e/_9zTi5d
idler pulley: https://s.click.aliexpress.com/e/_AfzyTZ
flexible shaft coupling: https://s.click.aliexpress.com/e/_A36akx
lead screw with nut: https://s.click.aliexpress.com/e/_ANb1h1
Hotend Kit: https://s.click.aliexpress.com/e/_Ar2PQF
mk8 extruder right: https://s.click.aliexpress.com/e/_A0Lfeb
heated bed: https://s.click.aliexpress.com/e/_99Wtzp
glass bed: https://s.click.aliexpress.com/e/_AEPONd
bed spring set: https://s.click.aliexpress.com/e/_AmMexZ
Fasteners: https://s.click.aliexpress.com/e/_AEun4r
M5 Sliding Nut: https://s.click.aliexpress.com/e/_APaLMJ'>https://s.click.aliexpress.com/e/_APaLMJ

Electronic Parts:
Arduino Mega V3: https://s.click.aliexpress.com/e/_AXTXaL
RAMPS 1.6: https://s.click.aliexpress.com/e/_9HI3fl
128x64 LCD Display: https://s.click.aliexpress.com/e/_AmJ53d
DRV8825 Driver: https://s.click.aliexpress.com/e/_APjYyL
NEMA 17 Stepper Motor: https://s.click.aliexpress.com/e/_ASxbd1
Endstop Limit Switch 3 Pcs Set: https://s.click.aliexpress.com/e/_9Ai3D1
12V 20A Power Supply: https://s.click.aliexpress.com/e/_9AGjmx
12V Turbo Blower Fan 4020: https://s.click.aliexpress.com/e/_A8fOiP

DIY 3d Printer Part 1 Frame:    • DIY 3D Printer  Part 1  Frame Assembly  
DIY 3d Printer Part 2 Mechanical(1/2):    • DIY 3D Printer  Part 2   Mechanical...  
DIY 3d Printer Part 2 Mechanical(2/2):    • DIY 3D Printer  Part 2   Mechanical...  
DIY 3d Printer Part 3 Electronics(1/2):    • DIY 3D Printer  Part 3  Electronics...  
DIY 3d Printer Part 3 Electronics(2/2):    • DIY 3D Printer  Part 3   Electronic...  
DIY 3d Printer Part 4 Firmware:    • DIY 3D Printer  Part 4  Marlin Firm...  
DIY 3d Printer Part 5 Test Print:    • DIY 3D Printer  Part 5   Final Setu...  


Kindly stay tuned for all the links mentioned in the video. they will be updated soon.

#3DPrinter #Arduino #DIY