Hot to make aquarium external filter using two jars like Canister filter.
Subscribe : https://goo.gl/J4sgjG

In this video you will see two filter constructions with the same material. What is different is only in the input and output sections.

First, the filter media is placed in the inlet while the submersible pump is placed in the outlet section. Power head works to take (suck) water from containers that have filter media.

Second, the filter media is placed in the outlet section and the pump is placed in the outlet section. Power head works to push water into the container with filter media.

NOTE:
This is just an experiment, you can change all filter media and their arrangement based on your experience and your own method.

Materials needed:
1. Plastic jars
2. Aquarium transparent pipe
3. Pipe and hose connector
4. Ring verlop
5. Plastic hose
6. Duck end connector
7. Seal tape (Optional)
8. Submersible power head Yamana WP77 (220240 VAC/ 600L/H 5 Watt
9. Epoxy glue (strong and waterproof)
10.Plastic faucet

Other videos:
DIY Canister Filter using DC Submersible Pump:
   • DIY Canister Filter Using DC Submersi...  

Power head Yamano WP700G:
   • Yamano WP700G Water Pump | Unboxing ...  

How to make DIY Canister filter with air exhaust hole:
   • How to make DIY Canister filter with ...  

Hang on filter Yamano MP77:
   • Hang On Filter Yamano MP77 | Unboxin...