In this video I will share with you how I built the motion platform microcontroller, wired the servo controllers and set up the servo parameters.

The video shows the construction of devices that operate at voltages that can be lethal if miswired. If you don't have the requisite skills to confidently build the servo controller box, ask an qualified electrician to do it for you.

Materials
Servo controller box Bunnings Tactix $26
3D printed box for Arduino
PCB for Arduino shield $10
DB25 25 Pin 180 Degree Female Dsub PCB Mounting Connector 5 Pcs $7
Serial Cable DB25 M/M, 2m from Lindy $49
Arduino Leonardo R3 Compatible With USB Cable $16
Plastic Shell Emergency Stop Mushroom Push Button Switch $10
Small 2wire terminal block
90ST M02430 servo drivers and motors $882
Aliexpress David Shen
Bunnings Deta 20A weatherproof switch $17
Powerboard with spike protection (3150 Joules) HPM 8 Outlet TV/AV Surge Protected Powerboard $61
Wire
Crimp terminals
Optional: ferrite cores from Mouser electronics for VR users $84 for 10

You can download the software from here
https://github.com/SimFeedback/SimFee...

Shield video by Patrick Moynihan
   • Build your own SFX100 Shield  

Get the pcb files from
https://github.com/Pyronious/SFX100...

Order pcb from
https://jlcpcb.com/
Min order five total cost was about $10
Use the Gerber files
when you order online

The 3D STL files are here
https://www.thingiverse.com/thing:352...

The games currently available are:

Assetto Corsa
iRacing
Project Cars
Dirt Rally
Raceroom
F1 2018
rFactor 2
No limits 2 roller coaster
DCS (in alpha build via the Discord channel)
XPlane (unofficial plugin from XPlane forums )
You can write you own as well the framework is open source