Learn to disassemble and repair your DJI Mini 4 Pro, from the damaged drone body, camera gimbal, arm shaft, and ESC board, with this stepbystep guide!
Buy tools on AMAZONAustralia:
Screwdriver Set: https://hfixt.com/au1
Opening Tool Set: https://hfixt.com/au2
Magnetic Mat: https://hfixt.com/au3
Tweezers: https://hfixt.com/au4

Global AliExpress:
Screwdriver set: https://hfixt.com/alis
Tool Set: https://hfixt.com/alit
Magnetic Mat: https://hfixt.com/amat
Tweezers set: https://hfixt.com/altz
Body Parts: https://s.click.aliexpress.com/e/_DmX...
Motor: https://s.click.aliexpress.com/e/_DcJ...
GPS module: https://s.click.aliexpress.com/e/_Ddw...
Gimbal Rubber: https://s.click.aliexpress.com/e/_DEQ...
ESC board: https://s.click.aliexpress.com/e/_Dnp...

Useful links
Gimbal Calibration Tutorial:    • DJI Mavic Gimbal Calibration  
More DIY drone repair guides: https://howfixit.com

Follow us for more tech tutorials:
Instagram:   / howfixit  
Facebook:   / howfixit  
Twitter:   / howfixit  

DESCRIPTION
Welcome to HowFixit! In this repair guide, I’ll show you how to disassemble the DJI Mini 4 Pro to repair damaged or faulty parts. Whether you're dealing with a broken camera gimbal, malfunctioning vision sensors, or a faulty ESC board, this video has got you covered. We'll guide you through the entire process, from removing the top cover to reassembling the drone, ensuring you can confidently replace parts like the motherboard, GPS module, arm shafts, and more.
If you find this guide helpful, please give us a thumbs up and subscribe to HowFixit for more tech repair guides. Visit our website for additional insights and DIY tips. Remember, every tech challenge is an opportunity to learn and grow. Thanks for watching, and have a safe flight!

Tools Needed:
Phillips 1 Screwdriver
Torx T5 Screwdriver
Plastic pry tools
Tweezers
Glue gun
Soldering iron (if replacing the ESC board or drone arms)

Key Steps Covered:
How to safely disassemble the DJI Mini 4 Pro.
Detailed guide on replacing the camera gimbal.
Steps to remove and replace the GPS module and motherboard.
How to handle and replace vision sensors and arm shafts.
Tips for ESC board and arm replacement.
Troubleshoot common issues like GPS signal problems, motor errors, and more.
Reassembly tips to ensure your drone is as good as new.
For each replacement part or tool mentioned, links are provided in the description below to help you find exactly what you need.

Time Code:
00:00 Introduction to Drone Disassembly Guide
00:27 Repair Tools for DJI Mini 4 Pro
01:05 Disassembly
01:47 Removing the Top Shell Cover
03:00 Removing the Camera Gimbal
06:38 Removing the GPS Module
07:52 Removing the Motherboard
11:05 Removing the upper and front vision sensors
11:42 Removing the Bottom Cover
12:36 Removing the Downward Vision Sensors
13:57 Removing the Front Arm Shafts
15:29 Removing the Rear Arm Shafts
15:55 Replacing the Arm Motor and ESC Board
16:41 Completely disassembled DJI Mini 4 Pro
16:55 Reassembly
33:35 Final check

FAQ:
Q: What tools do I need to disassemble the DJI Mini 4 Pro?
A: You will need a Phillips 1 screwdriver, Torx T5 screwdriver, plastic pry tools, tweezers, a glue gun, and a soldering iron if replacing the ESC board or drone arms.

Q: How do I replace the camera gimbal on my DJI Mini 4 Pro?
A: Disconnect the gimbal transmission cable, remove the adhesive pad, and carefully detach the rubber holders to remove the gimbal. Follow the video guide for detailed steps.

Q: Can I replace the ESC board myself?
A: Yes, but you will need soldering skills and tools. If you are not comfortable with soldering, consider sending your drone to DJI service for repair.

Q: Where can I find the replacement parts for DJI Mini 4 Pro?
A: Links to all the necessary tools and replacement parts are included in the video description below.

AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.

#djimini4pro #howfixit #dronefix #diy