This guide shows you how to get HamPi onto the Inovato Quadra. This is a very basic / easy install guide.

Future episodes will go into configuration of software, wifi etc, but since this image is on a Microsd card, Please feel free to play around. If you mess something up, just reinstall the image on the SD Card.

Inovato Quadra https://www.inovato.com/

"Meet Quadra: A $29.95 complete miniPC for school, home, hobby
Not just a raw board, Quadra is a complete modern Linux computer that can be used as a server or lightuse desktop. It includes the case, heatsink, power adapter and HDMI cable. Just plug into a TV or monitor and a keyboard/mouse. No SD card needed as the OS (Debian Bullseye 64bit) is preflashed in internal memory. A great option instead of Raspberry Pi when you don't need the 40pin I/O header or want something more affordable that doesn't require assembly."

I recommend the 39.95 unit with the 10 dollar bluetooth / usb hub upgrade.

NOTE: MicroSD card will show as 16gb filesystem. I'll have a video soon on expanding the filesystem, when i figure it out.

Sourceforge Hampi Image https://sourceforge.net/projects/hamp...
Download the img.xz file. At the time of recording, it is HamPi_v3.1.1b2_InovatoQuadra.img.xz (Things change, I cannot control that)

In the event you need a text guide for the flashing of the image https://sourceforge.net/projects/hamp...

Balena Etcher to write the image to a SD Card https://www.balena.io/etcher/

Hot tip: if you wish to just burn the image to the device drive, just unplug everything, only plug in the power, and wait about ten minutes until the light turns blue on the quadra. Then you should be able unplug, remove the sd card and plug everything back in, stuff the Hampi/hamiq image on the internal 16gb drive. Video to come
Best of luck.

Best of luck.