The most common question asked about power meter pedals, especially ones designed for offroad use, is "will they hold up?". In my experience the PRO MX have held up very well for all the conditions I've ridden them in. The same can't be said about the carbon cranks I've been using though!

➡ SUBSCRIBE to The GPLAMA YouTube Channel: https://goo.gl/QS5YZg
➡ GPLAMA Channel Memberships https://bit.ly/2CUXTaC

Links:
Favero Official: https://bit.ly/3T1IOMm
(FYI The above link is NOT an affiliate link)

Technical Specifications:
Products: Assioma PRO MX2 / MX1 / MXUP
Pedal Type: SPD (MTB XC / Gravel / CX)
Bearings: 2x Needle Roller Bearings.
Stack Height: 11.2mm.
Pedal QFactor: ~53.2mm* (*not an official spec. GPLama measured)
Weight: 191.4g each (382.8g pair MX2)
Pedal Body Replacements: Yes (€49 + VAT).

Power: 0 3000W
Power Accuracy: ±1%
Cadence: 10250 rpm
Battery: Internal rechargeable. 60hrs operation.
Protocols: ANT+, Bluetooth (x3).
Data: Power, Cadence, L/R Balance (MX2),
Additional Data: IAV Cycling Dynamics Power Phase, Platform Centre Offset, Torque Efficiency, Pedal Smoothness, Rider Position.
Active Temperature Compensation: Yes.
Calibration: AutoCalibration (manual calibration required on installation/bike swap).
Oval/QRing Compatibility: Yes.
Ingress Protection Rating: IP67 (6 = Dusttight. 7 = 1m water for 30mins)
Configuration / Firmware / Diagnostics: Favero Assioma Mobile App (IOS / Android).
Max User Weight: 120kg
Warranty: 2 years.


https://gplama.com​​
#Cycling​​ #PowerMeter​​ #Assioma