Making your own filament for 3D printing has never been easier
Just wanna say Hi and THANK YOU FOR YOUR SUPPORT WITH LIKES! ❤
Thanks to @mr3dp for the original idea of using w1209 !!!
Before you print it: https://bit.ly/snl2
TUTORIAL: http://petamentor.com/
STL: http://petamentor.com/stlfiles/
PARTS: http://petamentor.com/parts
Our Forum: https://petamentor.com/forums/forum/d...
official FB group: / 594548605536945
DIY PET filament from Bottles with DIY Petamentor machine
SUBSCRIBE to all available tutorials and parts!
The production of filament from a pet bottle works on a simple principle. The first step is to cut the tape from the bottle on a simple cutter. The second step is to heat the tape using a heated nozzle with a set temperature of around 210 degrees Celsius. The third step is to guide the first centimeters of the filament onto the winding spool. The process takes about 45 minutes and it is possible to produce about 8 meters of filament from one bottle. The printing temperature is about 250 260 degrees Celsius. The filament diameter can be compensated by setting the flowrate in your slicer.