Check out my friend ‪@kedexworld‬!
__________________________________

Today we are in No Mans Land with ‪@kedexworld‬ and we got information that there is an abandoned flipped flatbed trailer at the edge of the forest. The story was that the few guys were stealing wood from the forest and they flipped the trailer and just left it there. So we jumped onto our dirt bikes and we went looking for the trailer. After some driving around we found the abandoned trailer flipped and cover in the bushes. We looked around and then we made a plan on how to recover the trailer. When that was done we headed back to the farm to get the equipment we need. We got the MB Trac with back loader and forks and we got Fendt 926 Vario with the winch on the back and we headed to the trailer. We deiced to use the Fendt with the winch to get the logs of the trailer and then use the Fendt to pull the logs back to the farm. After we got the logs off we used MB Trac to flip the trailer over and then we attached it to the MB Trac. We pulled it in the clear to see if everything was good and if we can pull it back to the farm. When we got the trailer ready we headed back to the farm. On the way back we stopped at the Sawmill and we loaded it with the logs from the flipped trailer. After that was done we continued back to the shed where we washed the trailer. Then we got the trailer to the workshop and we repaired all the damaged and then we repainted the trailer. When that was done it was time to start harvesting barley. We got the Fortschritt harvester and Unimog with the trailer to the field and then we attached the header to the harvester. We parked the Unimog with the trailer on the side of the field so the guy who harvests can unload. Kedex started with harvesting barley and I jumped into Fendt 926 Vario and attached the Pottinger Impress 125F PRO and I started baling straw right behind him. Halfway through the field we switched jobs and I finished harvesting the field and he finished baling straw. After I finished harvesting I jumped into Unimog and unloaded the trailer into the silo and the unloaded the leftover grain from the harvester into the trailer. When that was done I put the header onto the trailer and then attached it to the harvester and then headed to the shed. Then I washed the harvester and header trailer with the header and parked them in the shed. After that was done I jumped into Fendt and I used it to move the slurry tanker out of the way. When that was done I attached the new flatbed trailer to the Fendt and then I parked it. Then I jumped into MB Trac and waited for the Kedex to get into the Fendt. We refueled the MB Trac and we headed to the field to get all the straw bales. I used MB Trac to load the bales onto the trailer and when we got all of them loaded we transports them to the cow shed. Then Kedex switched with me and unload and stacked the bales next to the shed and I just waited. After that was done we parked the trailer next to the bale shed and then we parked everything in the shed. When everyone was finished we headed inside the house to take a break.

Enjoy the video!

__________________________________

Instagram:   / th3camp3r  
Facebook:   / th3camp3r187715096658809  
Join my Discord: https://discordapp.com/invite/CTeUcem
Business email: [email protected]

__________________________________

Save game and mods:    • Save Game | No Mans Land  SURVIVAL |...  

__________________________________

If you want to support me and my work. You can use the link down below to purchase Farming Simulator or any DLC and I will get a small commission from it!

GIANTS Partner Code: THECAMPER

BUY Farming Simulator 22(PC): https://www.farmingsimulator.com/buy...
BUY Farming Simulator 22(PCDownload): https://www.farmingsimulator.com/buy...
BUY Farming Simulator 22 Season Pass(PC): https://farmingsimulator.com/dlcdet...
BUY Farming Simulator 22 Antonio Carraro Pack DLC: https://www.farmingsimulator.com/dlc...

___________________________________

✔If you need a server for Farming Simulator 22, check out this: https://nitra.do/TheCamPeR

___________________________________

PC Specifications:
Processor: AMD Ryzen 9 3900X AM4
Motherboard: GIGABYTE MB B450 AORUS ELITE
Graphics Card: Gigabyte RTX 2070 SUPER 8GB
RAM: 2x8GB 3200 MHz DDR4 Patriot VIPER
Power Supply: Thermaltake RGB 650W
SSD1: Samsung 970 EVO NVMe M.2 1TB
SSD2: Intel 660P M2 NVME 3 500 GB
HDD: WDC WD10EZEX 1TB

__________________________________

Music:
Intro: Meet me (feat. nož) mickey valen
Outro: Glude Dreamers
Songs:
0:11 3:53 Dance Lvly
3:54 7:43 Gimme That Katnip
7:44 11:14 Out Into Space Vicki Vox
11:15 14:45 So Curious Daxten
14:46 18:12 Mad Woman Lvly
18:13 20:34 Trip Siine