WARNING: Failure to correctly program the receiver will very likely result in loss of a model. Check all settings and control surface movements prior to first flight. It is suggested that this first flight start with gyros turned off until reaching a safe altitude to check Safe and AS3X gyro settings.
Note: This will also work for the Spectrum AR630 and AR631 6 channel receivers with Safe technology and Forward Programming access.
If this is a new model not already in the transmitter you will also need to set it up per the model's manual before proceeding with the steps below.
This video is a followup to AR637TA firmware reload and receiver factory reset from my prior video showing how to reload firmware and a factory reset:
• AR731TA Complete Unlock Reload firm...
We fully reprogram the any of the receiver's lost settings from the firmware reload and factory reset by doing the following:
Relearn servos
Relearn receiver orientation
Program Failsafe
Check AS3X Gains and change if needed
Channel AUX 3 and switch B assign for Safe/AS3X
Safe/AS3X/No Gyro channel, switching and programming
Telemetry AutoConfig check
I show selected transmitter savings that do not change from the receiver firmware reload and factory reset. Depending on the model there may be others. These are just the basics for this Conscendo.
Chapters
00:00 Intro
06:12 Receiver orientation reset
11:25 Relearn servos
12:07 Program Failsafe
15:02 AS3X Gains
17:03 Safe/AS3X Channel and switch assign
22:11 Safe/AS3X/No Gyros Flight Mode settings
23:50 Safe Gains and Angle Limits
25:29 Check Telemetry settings
26:14 What does not need reprogrammed?
27:35 Summary and warnings