As seen on ‪@ThatRacingChannel‬
Jay Meagher and long time Nissan guru Mark Mazurowski dive deep into the world of Nissan 4 cylinder engine building in this detailed SR20 DET assembly video. Throughout this video you'll find tips and tricks that can help you along the way in your build, as well as some insight into the aftermarket support on these engines from two industry veterans.
 
In part one of this SR20 series, we tore down this engines core, and found some areas that needed attention:    • Fully Built Nissan SR20 Engine Assemb...   .

Teaming up with Mark from Mazworx Racing Engines, we were able to put together a new longblock capable of reliably reaching the customer's horsepower goal of 600hp. Interested in seeing more Nissan engine content? Let us know in the comments below in the video, and we'll work your ideas into our video schedule!

Build List and links.
Long Block Package similar to this build.
https://www.mazworx.com/sr20detrwdl...

Short block Package similar to this build.
https://www.mazworx.com/store/p/408M...

Head package similar to this build.
https://www.mazworx.com/sr20detstage...

SR20DET S13 Head, Stage 0.5 (Machine work at Mazworx)
Disassemble Head
Hot Tank/Clean
Remove/Drill/Tap/Replace Oil Port
Plugs, SR Head
Machine for Threaded Freeze Plugs
Remove, Reinstall, Ream Valve Guides
Valve Job, Multi Angle
Set Rocker Level
Resurface Head
Assemble Head
Parts:
Brian Crower Stage 2 Camshafts Street/Drift Spec #BC0205
Supertech Valve Stem Seals
Supertech Titanium Retainers
Supertech Single Valve Springs, 68lbs
Supertech Bronze Valve Guides
Supertech Intake Valves, Std
Supertech Incondel Exhaust Valves, Std
Mazworx Threaded/Oringed Freeze Plug Kit
Misc Plugs

SR20 Block, Stage 2.2
Disassemble Short Block
Hot Tank/Clean
Sand Blast Block
Remove/Retap/Replace Oil Port Plugs
Machine for Threaded Freeze Plugs
Sleeve Install
Resize Cylinders
Use Torque Plate During Honing
Step Deck
Resize Line Bore
Oil Groove Machining, SR20
Parts:
Darton Dry Sleeves
Wiseco 86mm 9.0:1 Pistons
Wiseco .866x2.500" .1969" Wall 5115 Material Pin Upgrade (Chamfered)
Brian Crower ProH2K Connecting Rods w/ ARP2000 Fasteners (17mm width bearing)
Nissan SR20 Crankshaft OEM 86mm
Oil Pump, SR20DET S14/S15
Mazworx SR20 Main Stud Kit
King Bearings Rod Bearings STD 17mm rod
King Bearings Main Bearings STD
King Bearings Thrust Washer
ACL Thrust Washer
ACL Race Main Bearings STD
Tomei Head Gasket 87.0mm Bore 1.5mm
Mazworx Threaded/Oringed Freeze Plug Kit
Mazworx Front Oil Squirter, SR20
Mazworx Billet Breather Adapter
Mazworx 10AN/Plug Water Pipe
Misc Plugs

Links:
Mazworx SR20 602 Crank Only Sensor Kit For RWD ATI
https://www.mazworx.com/mazworxsr20...
Timing Chain Tensioner (Comes in Timing Chain Kit)
https://www.mazworx.com/store/p/98Ma...
Mazworx Front Oil Squirter (Comes in Timing Chain Kit)
https://www.mazworx.com/store/p/347M...
Timing Chain Kit
https://www.mazworx.com/store/p/313M...
Valve Cover Washers
https://www.mazworx.com/mazworxsr20...
Head Studs
https://www.mazworx.com/store/p/141M...
Engine Bolt Kit
https://www.mazworx.com/store/p/133M...
OIl Pump Pickup
https://www.mazworx.com/sr20detrwdo...
Extended Oil Pump Drive
https://www.mazworx.com/oilpumpcran...
Crank Bolt
https://www.mazworx.com/mazworxsr20...
Main Studs
https://www.mazworx.com/store/p/132M...
Water Fittings
https://www.mazworx.com/sr20rwdwate...
https://www.mazworx.com/sr20rwdwate...
Breather Adapter
https://www.mazworx.com/sr20breather...

Thank you for watching! Don’t forget to Click SUBSCRIBE & turn on post notifications, click the bell icon

www.realstreetperformance.com
[email protected]
Phone: 4076957223
Text / Whatsapp: 4077242484

•Follow us•

Instagram:   / realstreetperformance  
Parts Instagram:   / realstreetperformanceparts  
Powersports Instagram:   / realstreetpowersports  
Facebook:   / real.street  
Twitter:   / realstreetrsp  
TikTok: https://www.tiktok.com/@realstreetper...