Please feel free to ask any questions or comment.
I replaced the guitar frets, made the nut, replaced the wiring, and polished the parts (overhaul) on a Gibson Les Paul.
I also replaced the bridge, though I didn't photograph it.
I cut a groove in the bridge.
Before the customer sent me the guitar, he said he only wanted to overhaul it, but the frets were worn down and there was a lot of distortion on the fingerboard and frets.
I thought I could deal with it with fret rubbing, but the customer said he wanted me to replace the frets and nut.
I'm very grateful.
I was nervous, though not more so than usual.
I hope you are satisfied.
Thank you very much for your request.
BGMProject2 (Shunnosuke Kaneko) "The Bar with Sherlock".
/ @userkh4ce5zx5m
Parts and tools used
TONE Power Grip Driver Set PLPGD6
https://amzn.to/2Q5MrRr
Wera Craftform Diamond Screwdriver Set
https://amzn.to/3s2RoLu
VESSEL Precision Hex Screwdriver
Set, https://amzn.to/2O6hFoC
1.27(inch)https://amzn.to/2X4xBvQ
1.5https://amzn.to/34KDAZs
Fret Polishing 3M Sponge Polishing
320600 https://amzn.to/2YC5c0k
8001000 https://amzn.to/2JnIEd9
12001500 https://amzn.to/32iG29c
Metal Polishing also Picard
https://amzn.to/32Ip7f7
For masking tape, 3M is good. For high frets on guitars, 6mm is recommended.
https://amzn.to/32H0gZ9
Dremel 4000 rotor. Great torque, but hot! If you can, get a 4000 because it can do a lot of things.
https://amzn.to/2Kh3NH5
I heard there is a new one called 4300. If you can use the base plate of a StuMac, this might work too.
https://amzn.to/3712F48
3M body polishing compound, this is enough for a guitar.
https://amzn.to/34WHuhO
It's good to have a lot of stuff, orange English oil for fingerboard
https://amzn.to/2Kh4G2n
This cloth is very good. Recommended. Seriously.
https://amzn.to/2PRUJM8
Website
https://pedaru.wixsite.com/andybassan...
Twitter
/ andybassguitar
Facebook
/ andybassguitar
Instagram
/ andy_bass_and_guitar
#andy_bass_and_guitar
#restoration
#asmr
#gibson