Espens maiden flight. Time is 10:45pm and the mosquitos are a pain in the .... Beautiful plane and she flies great. Adding the spec's from Hangar 9.

Key Features

Zenoah G20ei gas engine and servos installed
Fullbodied, posable pilot figure
Scale dash including Cub in tachometer
Scale Cub wheels and functioning landing gear
Operating door panels and removable interior seating for easy access to the plane's interior
Collapsable wing struts connected to wing and fuselage with an intelligent pin and cotter key system
Tubular construction for top outline more true to Cub scale lines
Scale fin to fuselage fillet
Covered in genuine Hangar 9 UltraCote®


Overview

It's all in the details. Large scale air enthusiast will marvel at this giant scale, super detailed J3 Cub PlugNPly™. The ¼ Scale J3 Cub PNP is a great flying large scale airplane, perfect for a 1st time large scale flight experience because of its smooth flight characteristics. Everything except for a transmitter and receiver is installed at the factory, including the perfectlymatched Zenoah 20cc electric ignition engine and JR digital servos. The Zenoah G20ei, the smallest, lightest gas engine available, has an impressive thrust to weight ratio that provides plenty of power to make this giant beauty soar. Fill the tank, turn on the ignition, flip the prop and it is running. You can experience longer flights, achieving better than 30 minutes per tank. All of these characteristics result in a great engine for anyone purchasing their first gasoline ignition model airplane. The low fuel consumption of the G20ei allows the consumer to fly longer with less fuel than similarlypowered 4strokes—making this Cub an economical performer.

Hangar 9 has thought of just about everything to make this large scale Cub an incredibly accurate replica of the everpopular Piper J3 Cub. Right down to the scale dash with Piper Cub emblem in the tachometer, this is the large scale beauty designed with the scale admirer in mind. Scale enthusiasts will appreciate the more realistic Cub outline facilitated by tubular construction of the top fuselage contour. Likewise, the scale fin to fuselage fillet molding echoes its fullscale counterpart. The scale Cub wheels and working landing gear facilitate easier landings, touch and go excitement and onewheel arrivals.

Scale fanatics will be astonished by the fullbodied pilot figure that is not only of accurate scale but is also posable. The operating door panels offer easy access to the interior of the plane and interior seating locks into the cockpit floor yet is removable; both also contribute to the scale realism of the full scale Cub.

Besides the unparalleled scale detail, consumers also get smart design features like collapsible wing struts that are connected to the wing with a pivoting pin and keeper while a pin and cotter key system allows the struts to be removed from the fuselage without hassle. The 2piece stab can also be removed if necessary.

Product Specifications
Wingspan: 106 in (269 cm)
Overall Length: 68 in (172.7 cm)
Wing Area: 1630 sq in (150.2 sq dm)
Flying Weight: 15.36 lb (6.97 kg)
Engine Size: Zenoah G20ei (ZENE20EI) 20cc electronic ignition gas engine (installed)
Radio: 4 to 6 channels
Servos: 6 JR HiTorque (JRPS821) digital servos (installed)
Trim Scheme Colors: Cub Yellow (HANU884) & Black (HANU874)
CG (center of gravity): 4 ¾ to 5 inches from the leading edge of the wing at fuselage
Wing Loading: 21.73 oz/sq ft
Prop Size: 16x6
Spinner Size: 8mm x 1.25
Recommended Battery: 2400mAh 4.8v ignition pack (JRPB4460) & 2400mAh 6v RX pack (JRPB4470), Both Included
Aileron: 5/8 in—up; 1/2 in—down
Elevator: 7/8 in—up/down
Rudder: 1 ½ in—left/right
Scale: 25%

Enjoy and remember to check out ArcticRc on facebook