High Quality LED Flasher Using BC547 NPN Transistor | LED Flasher | Javier's DIY
An LED flasher circuit is a circuit which flashes the LED meaning turns it ONOFF, ONOFF, ONOFF.
The BC547 is a NPN transistor meaning when power is applied to the base (control pin) it will flow from the collector to the emitter. Typically NPN transistors are used to “switch ground” on a device, meaning, they are placed after the load in a circuit.
Component's Needed:
2x BC547 NPN transistor
2x 10v 470uf capacitor
2x 10K ohm Resistor
Insulated wires
Copper wire .1mm
5x LED Blue lights
5x LED Red lights
4.2VDC input
Subscribe to my channel and click the bell button to be updated on my next video. Thank you for watching♥Enjoy and have a great day.
/ javier'sdiy
Related DIY videos:
DIY RC Car from Cardboard:
• How to Make RC Car From Cardboard | J...
DIY 12v Power Supply:
• How to Make 12v Power Supply and Char...
DIY 13000 mAh Powerbank:
• How to Make a 13000 mAh Powerbank
DIY Sander Disk from Old DVD/CD player:
• How to Make a Mini Sander Disk from O...
3 in 1 Power Supply:
• How to Make a 3 in 1 Power Supply in ...
DIY VU Meter:
• How to Make a VU Meter Without an IC
DIY Face shield:
• How to Make DIY Face Shield
DIY Tester:
• How to Make Test Light at Home Simple...
DIY Flashlight:
• How to Make Emergency Light at Home |...
DIY RC Car:
• How to Make RC Car From Cardboard | J...
DIY Generator:
• How to Make Generator Using DC Motor
DIY Air Cooler:
• How to Make a Powerful Air Cooler at ...
DIY Water Pump:
• How to Make Powerful Water Pump at Home
DIY Air Pump:
• How to Make an Air Pump | Javier's DIY
#BC547LEDFlasher
#LEDFLASHER
#HighQualityLEDFlasher