Rules for Blocktanks Art:
Arms:
Cannot be too red or blue, no more than 40%.
Cannot be wider at the barrel in comparison to the base (For example, umbrella arm that shoots out of the tip)
Cannot be longer than the tank, exceptions can be made if it is very thin.
Follow dimensions of the standard blocktanks arm, do not go over that size. Only case is small appendages (for example, wings) are allowed, 1/4 the length of the standard arm at most.
Arm cannot be wider than it is long.
Arm cannot be close to identical on both ends.
Arm cannot be same width and length, also cannot be too small.
Do not use shapes that are not “tanklike”
Avoid arms that are hyperdetailed with random colors and no set theme of choice.
Arms cannot be too “low effort”.
Decals
Cannot have blue or red whatsoever.
borders must be 5 pixels thick at most (55x55), if it must go over, you must leave some space where the team color could be clearly seen.
Translucent parts of decals must be clear enough to show the team color easily.
Going over the 50x50 size is allowed, only small appendages that does not exceed 5 pixels outside
never make the base “square” larger than 50x50 pixels. 55x55 pixels only if there is a margin.
must be square shaped
Stickers:
Cannot be more than 1/3 red or blue.
Cannot be over 60% bigger than the standard arm without covering the decal.
Stickers that do not go over the standard arm are recommended, if yes, a small appendage is allowed.
Stickers cannot look like an arm or anything similar.

Explosions
Particles cannot fly further than the original explosions made.
#blocktanks #blowup #gaming #art #blocktanksart #howtogaming