In this video I show the best way to capture your old mini DV camcorder tapes using a PC running the latest version of Windows 11 (22H2) using the adapters required to go from FireWire (i.Link, IEEE 1394, etc) to Thunderbolt 3 or (USBC plug). Below are time stamps and links to the hardware and software you'll need.

Note if you have a brand new computer with an Intel 10th gen processor or newer or have Thunderbolt 4, please see my updated video here:    • How to use legacy FireWire and Thunde...  

Time Stamps:
0:00 Intro
0:26 Hardware setup
2:10 Software setup
5:01 Capture procedure DV
5:56 Capture procedure HDV
6:27 Optional final steps
6:42 Problem troubleshooting
7:27 Wrap up
7:55 End

Links to the items mentioned in the video:
Apple Thunderbolt 3 and 4 (USBC) to Thunderbolt 1 and 2 Adapter:
https://amzn.to/3SqHGPb

Apple Thunderbolt 1 and 2 to FireWire 800 adapter: (if unavailable, watch    • How to use FireWire WITHOUT Thunderbo...   for more info)
https://amzn.to/3UyFYwY

FireWire 800 to 400 mini plug cable:
https://amzn.to/3xMclOZ

FireWire 400 to 800 cable:
https://amzn.to/3xKbazE

FireWire 400 to 800 adapter:
https://amzn.to/3xLlw2i

FireWire 400 mini to 400 mini cable:
https://amzn.to/3LCxAIF

FireWire 400 mini to 400 full size adapter:
https://amzn.to/3LxJgg1

Have a desktop with a PCI/PCIe card slot, or a laptop with a ExpressCard/PCMCIA card slot:
https://amzn.to/3BAf5A5

Laptops with Thunderbolt/FireWire:
https://amzn.to/3dBGXfo

Other items I recommend:
https://www.amazon.com/shop/scottschramm

(note the links above are affiliate links which helps support my channel. Your price stays the same but a small commission may come back to me if you decide to purchase anything using my links. It's a winwin for everyone!)

Software Mentioned:
WinDV: https://www.videohelp.com/software/WinDV
HDV Split: https://www.videohelp.com/software/HD...
KLite Codec Pack Basic: https://codecguide.com/download_klit...
Handbreak: https://handbrake.fr/

Other videos that may help you:
How to connect a FireWire Audio Interface to a Mac or PC with Thunderbolt 3/USBC
   • How to connect a FireWire Audio Inter...  

How to connect FireWire devices into new Mac's with Thunderbolt 3/USBC
   • How to connect FireWire devices into ...  

How to connect FireWire devices to a new M1 Mac with Apple Silicon
   • How to connect FireWire devices to a ...  

How to use legacy FireWire and Thunderbolt devices on new PC's with Thunderbolt 4
   • How to use legacy FireWire and Thunde...  

Troubleshooting
If you are having issues with your PC connecting to the device, there are a few things you can try:

1. Ensure your PC has a Thunderbolt port (not just a USBC/charging port). Visit the support page of your computer (support.dell.com, support.lenovo.com, etc) and verify that your drivers are up to date. Sometimes the Thunderbolt driver is separate and needs to be installed manually. Also check that your BIOS is up to date. If you're getting blue screens when you plug in, this is the solution.

2. Check the settings in your BIOS as there may be a setting in there to allow data over the Thunderbolt port. Here is an example link that shows the settings: https://www.dell.com/support/article/... There is also usually an app within Windows called the "Thunderbolt(TM) Software " and make sure it is set to "Always Allow" like this: https://www.caldigit.com/thunderbolt...

3. If your camcorder still does not communicate, then you may need to install a driver, although this is extremely rare. Here is a good webpage that may help you troubleshoot FireWire specific drivers: https://www.studio1productions.com/Ar... Additionally if you installed a special FireWire driver you may want to uninstall it and try the built in Windows driver as that may be all you need. You can also try installing a legacy FireWire driver by following these directions: https://www.startech.com/enus/faq/fi...

4. Here is a good guide from Sony which has a few other troubleshooting steps: https://www.sony.co.uk/electronics/su...