In this video tutorial we are going to teach you How to Connect a 3Speed ​​Fan Motor. The STATOR of your FAN must have the 8 lines that correspond to the 4 INPUTS and the 4 OUTPUTS of the 4 COILS.

Download the diagram from this video: https://bit.ly/Diagrama3Velocidades'>https://bit.ly/Diagrama3Velocidades

SUBSCRIBE FOR FREE!!
https://bit.ly/JMRepara'>https://bit.ly/JMRepara

Then you must verify that these same COILS have continuity to do so, measure them and obtain the readings in Ohms, of which we will observe that 2 low readings and 2 high readings will be generated.

The order that the COILS must be in the STATOR is as follows: of the 2 COILS with high readings, the one with the lowest value will be the first in the CONNECTION and we will call it WORK COIL. Of the 2 COILS with low readings, the one with the highest value will be the second and we will call it AUXILIARY COIL 1.
Then, we will place the one with the lowest value and we will call it AUXILIARY COIL 2. Then the one with the highest value in Ohms and we will call it STARTER COIL .

How to Repair Appliances: https://bit.ly/ComoRepararElectrodome...

What You Should Know About Fans: https://bit.ly/LoMejorSobreVentiladores

A Quick Guide to Troubleshoot Your Fans: https://bit.ly/COMOREPARARVENTILADORES

Now I suggest you watch the video so that you can connect the MOTOR OF YOUR 3SPEED FAN.

SUBSCRIBE FOR FREE!!
https://bit.ly/JMRepara'>https://bit.ly/JMRepara

THE Diagram Of This Video: https://bit.ly/Diagrama3Velocidades'>https://bit.ly/Diagrama3Velocidades