Overview of the three basic steps and speeds & feeds for cutting Cast Acrylic on the Sainsmart 3018 PROVer and other smaller CNC Machines. We will also review Measurements to find the thickest part of your acrylic, Using Carbide Create Pro to generate your GCode, and editing you GCode to go back to your home position, Hint: Add X0.00 & Y0.00 to your GCode. And as always feel free to comment or email me if you have any questions.
For materials I am using a nominal 5mm thick CAST Acrylic, EXTRUDED Acrylic gums up the bits on these machines very easily. CAST Acrylic has a HIGHER MELTING POINT, where as EXTRUDED has a LOWER MELTING POINT. Also I am using a 30 Degree 0.1mm V Bit for the detail work, and an End Mill (You can use any Size in the 0.8mm to 3mm set) I also use the Tape & Super Glue Method to hold my material in place.
#cutacrylic #cnc #3018Prover #maker #edgelit
SHOP THE NEW DEHAMMER STORE:
https://www.dehammermaker.com/shopde...
YOU CAN GET THE NEW MK2 LONG MILL HERE (These are affiliate links that help support the channel and add nothing to the overall cost):
https://sienci.com/product/longmillm...
Check out my follow up video for tips on cutting acrylic:
• Tips for Cutting Acrylic on 3018 CNC ...
• CNC Engraving: Discover the SpringLo...
Please note that these are the speeds and feeds that work with my machine. You will need to play around with yours and dial in the setting for your machine.
FEED: 200250mm
DEPTH PER PASS: .1mm .2mm
PLUNGE: 75
SPINDLE SPEED: 9,000
The Below Links are affiliate links and I may make a commission off of any items sold. This helps fund the channel and to keep making videos.
Here is a link to the CNC machine I use:
https://amzn.to/3C35Nfa
Link to the .1mm V bit:
https://amzn.to/3ni11E9
Link to the .8mm3mm End Mills:
https://amzn.to/3G8D5fd
CAST Acrylic
https://amzn.to/3pxm2NQ
LED BASE:
https://amzn.to/3vAUCaR
LED BASE WITH ACRULIC BLANKS:
https://amzn.to/3BfaNw5