EATON FULLER ROAD RANGER GEARBOX EXPLAINED for beginners.

Luke Watson explains how to double the clutch and how to change gears in a truck with a roadranger gearbox. Eaton Fuller makes 9speed, 10speed, 13speed, 15speed and 18speed roadranger transmissions and these crash box gear boxes are found in Mack, Kenworth, Isuzu, UD, Fuso, Freightliner, Peterbilt, Western Star, Sterling, Hino and many other types of trucks and buses.

~ ~ ~
If you found this video helpful you can gift LUKE WATSON with a donation or buy him a coffee:
https://www.buymeacoffee.com/lukewatson
https://donate.stripe.com/dR6dSx1Hj40...
~ ~ ~

HOW TO DRIVE A TRUCK Contents:
00:00 the gear pattern (in this truck)

01:23 how to double the clutch introduction

01:32 how to double the clutch going UP the gears
Double The Clutch (Up Shift)
1) press in clutch and move gear stick to neutral
2) release foot off clutch
3) press clutch in and knock gearstick into the gear

01:53 how to double the clutch going DOWN the gears
DoubleTheClutch (Down Change)
1) press clutch in and pop gear stick to neutral
2) release foot off clutch
3) rev the engine with accelerator
4) press clutch in and push gearstick into gear

02:09 demonstration of going UP the gears (doubling the clutch)

04:30 demonstration of going DOWN the gears (doubling the clutch)

08:00 specifics about using half CLUTCH only when changing gears

08:37 changing UP gear with no clutch (aka floating the gears) N.B. for driving tests in Australia clutch must be used, if you change gears without clutch your will be given an driving error on your driving test so this is for after you pass your test)

09:38 changing DOWN the gears with no clutch

10:55 CLUTCH use when going DOWN gears

11:27 how to overcome getting LOST and forgetting which gear you are in

12:36 how to come to a STOP and then select a takeoff gear


#trucks #roadranger #eatonfuller