Learn how to shift a 9, 10, 13, 15 or 18speed transmission here! Watch the video. AIR BRAKE CHECKLIST: https://www.smartdrivetest.com/cdlai... SUBSCRIBE TODAY! ► / smartdrivetest See TOPICS below!!
#truckdriving #smartdrivetest #shifting
Driving a nonsynchromesh transmission is the coordination of the clutch, the throttle, and the shifter.
In order to shift a nonsynchromesh transmission, or some times referred to as a "crash box", the driver must line up 3 things:
1) the road speed
2) the engine speed
3) the gear
If these 3 things do NOT line up, the transmission simply will not shift.
*****************************
0:00 Introduction
1:34 Shifting Patterns
3:10 Range Selector
4:40 Splitter
5:03 13Speed Transmissions
6:27 18Speed Transmissions
7:12 15Speed Transmissions
8:44 Synchronizing the Transmission
10:12 5th Gear The Happy Gear
11:44 Progressive Shifting
14:26 The Clutch
16:41 Double Clutching
18:04 Correct Seat Adjustment
18:48 Downshifting
22:44 Uphill | Downhill Shifting
24:14 Not a Spectator Sport
25:04 Conclusion
****************************
MONETARILY SUPPORTING THE CHANNEL:
If you wish to support the channel monetarily, you can donate via PayPal here: https://www.paypal.me/smartdrivetest
This is appreciated and helps the channel, but please don't feel that it is necessary to be part of the smarter driver community.
****************************
Most transmissions in tractortrailers in this dayandage are either a 13 or 18speed transmission. And all transmissions are essentially a 5speed "H” pattern.
And progressive shifting was designed to maximized fuel economy on large electronic diesel engines. Progressive shifting indicates that you should bring the revs up approximately 50 rpms and then shift to the next gear. However, when pulling heavy, or shifting uphill, the driver will have to bring the revs up higher to compensate for a drop in road speed.
Finally, the clutch on a nonsynchromesh transmission looks like any other clutch, but must be used in a completely different manner than a manual transmission on a car or light truck. There are 4 points along the clutch's travel path:
1) freeplay
2) friction point
3) dead space
4) clutch brake
The clutch brake on a big truck is only used to get the vehicle into a starting gear, whether that is first, reverse or whatever gear the driver start the vehicle in. And to coordinate the speed of the transmission with the the road speed, the driver has to double clutch. Simplistically speaking the driver clutches once to bring the gear selector into neutral and then again to put the transmission in gear.
One of the gears that we like the best is fifth gear. If you lose a gear and you're trying to recover and find a gear eightyfive percent of the time the transmissiona 13 or 18speed transmissionwill go into fifth gear. So fifth gear up here with the range selector up, back to the first slot fifth gear is your goto gear. 85% percent of the time the truck will go back into fifth gear and you can carry on. Sometimes it may not be pretty, but you can get it back into fifth gear and go.
In conclusion, shifting theory. All transmissions are basic 5speed patterns. What allows a 5speed transmission to become a 10speed transmission is the range selector. Down for low, up for high. The only time you use the range selector is between fourth and fifth. You're going from 4th to 5th, pull it up, and shift to fifth.
If you're going from fifth to fourth, push it down before you come out of fifth and it'll shift as you go through neutral. And you'll hear it after you get a bit of practice with it, you'll be able to hear the transmission click from high range too low range as you're moving through neutral.
The splitter gives you 13 or 18speeds. If you get in a 15speed it's going to be a blue button. So it's red, blue, or grey. Red is 13speed, blue is 15, grey is 18speed. The clutch is very different than most clutches that you're going to find on a car or light truck. Top of it's the freeplay, the friction point, the dead space and then the clutch brake.
And the engine speed is a misnomer it's not actually the engine speed that were worried about when we're shifting the truck. It's the transmission speed, but we don't have any way to measure the speed of the transmission gears in a nonsynchromesh transmission. So we use the engine's tachometer.
The clutch pedal has to be out, especially when you're down shifting and throttling up. Make sure the clutch is out when you're throttling up. As soon as you finish shifting the gear, get your foot off that clutch.
The last piece for nonsynchromesh transmission: when you're down shifting, slow down to gear down.
Good luck on your road test!
******************
www.smartdrivetest.com
www.facebook.com/smartdrivetest
www.twitter.com/smartdrivetest
www.instagram.com/smartdrivetest/