It's already windy season here, I need a small model jet for flying into the wind. Actually I'm already starting building the A10 Warthog model but venture a bit building park jet model, don't worry I will continue building the Warthog again. I choose Dassault Rafale because requests from you and also our air force (Indonesia) will also have this French fighter jet in the future. I choose B model because I think it looks cooler. After it finish I realize that this model is hard to hold with one hand, and that's gave me an idea to build the catapult launcher too. I shared the plans on the links below.

Dassault Rafale B 650mm Plans :
A4 Plans : https://paperreplika.com/RCplans/PR_...
A0 Plans : https://paperreplika.com/RCplans/PR_...
A3 Decal : coming soon

Build instructions :
not yet available (web maintenance)

DONATE via Paypal : [email protected]

RC Plane Catapult Launcher Plans :
A4 Plans : coming soon
Assembly instructions : coming soon

Join this channel to get access to perks:
   / @juliusperdana  

Specs :
1. Wingspan 650 mm / 25.6 inches
2. Flying weight : 655 grams/ 23.01 oz
3. Wing loading : 29.7 gram/dm2 9.7 oz/sq.ft.
4. Wing cube loading : 6.3 (Trainer = 6 to 7)
5. Wing Area : 22.09 dm2 / 342 sq.in.
6. CG : 5 cm from wing break point

Electronics (pusher)
2826 2200kv Turnigy (any 28/22 motor or drone race motor)
40A ESC
Battery Lipo 3S 2200mah
2 x 9 gram servos (micro servo)

Materials :
1. 5mm + 3mm Foamboard/ Depron/ Polyfoam
2. hot glue, UHU glue
3. packing tapes

Tools :
1. Hot glue gun
2. Heat gun
3. Covering iron