Actually I made this plane specifically for testing a homemade FPV cockpit with real control like control stick, throttle gauge and rudder pedals, but I feel like to release it on a separate video. This twin boom pusher RC plane is easy to build and also a very good flyer. You can use any motor from 35mm to 28mm (22mm) size motor, I use Racestar 2212 1400kv brushless motor with 8 inch prop.

SUBSCRIBE and Like to support this channel
#fpv #fpvplane #rcplane #buildvideo

Playlist :
00:00 Opening
01:49 Maiden Flight
05:00 Start building wing
07:21 Fuselage
08:26 Making Landing Gear
10:18 Tail Boom
10:53 Wing Mounting
11:27 Stabilizers
11:43 Control Surfaces
12:02 Installing Motor
12:22 Installing Servo

You can download the plans on the link below :
A4 Plans : https://paperreplika.com/RCplans/PR_...
A0 Plans : https://paperreplika.com/RCplans/PR_...

Build instructions :
not yet available (web maintenance)

DONATE via Paypal : [email protected]

Join this channel to get access to perks:
   / @juliusperdana  

ELRS Micro TX Module : https://bit.ly/3Gf8f4Q
ELRS Micro RX : https://bit.ly/3Nvr2LY

Specs :
1. Wingspan 1500mm / 59 inches
2. Flying weight : 1000 grams/ 35.3 oz
3. Wing loading : 34 g/dm2 11.2 oz/sq.ft
4. Wing cube loading : 6.3 (Trainer : 67)
5. Wing Area : 29.38 dm2 / 455 sq.in
6. CG : 5 cm from LE

Electronics
Racestar BR2212 1400kv brushless motor
ESC 20A
Battery Lipo 3S 2200mah
5 plastic gear 9 gram servos
Propeller : 8x6


Materials :
1. 5mm Depron/ Polyfoam
2. 2mm Plywood
3. hot glue + CA glue + foam safe glue
4. white packing tape